| Customization: | Available |
|---|---|
| Optional Accessory: | Relay, Gpio |
| Model Number: | Tk319-H |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Features
Supports GSM/WCDMA, include 9 band, universal in the world.
Super Wide Input Voltage:9-72V DC.
GPS precise positioning, Support A-GPS, uploaded by WCDMA/GPRS regularly, real-time tracking and history track playback.
ACC status detection
Support Temperature monitoring with a high-sensitive sensor(optional).
GPI/O port , can be extended to Serial port(Customization).
Built-in battery, Power disconnect alarm & Low battery alarm.
Built-in G-sensor ,Vibration, collision and falling alarm.
GEO-fence alarm, speed & shift alarm.
Relay to cut engine, Auto cut engine when over speed and recover when normal speed.
Support EELINK protocol 2.0, Firmware OTA upgrade
Water proof level IP65
Product Specifications
| Voltage | 12/ 24/ 36/ 48/ 60/ 72 VDC |
| Work Current | GPRS(140mA); HSPA(460mA) |
| Standby Current | IDLE(2mA@12V) |
| GPS Accuracy | 5-15m |
| LBS Accuracy | >100m |
| GPS Band | 1575MHz |
| GSM Band | 850/900/1800/1900MHz |
| WCDMA Band | W800/W850/W900/W1900/W2100MHz |
| Hot/warm/cold Start | <3s,<15s,<60s |
| Temperature-Sensor Accuracy | ± 0.5ºC |
| Temperature-Sensor Arrange | -30ºC~80ºC |
| Battery Capacity | 140mAh |
| Dimensions (mm) | 89(L)X 37(W) X 12(H) |
| Work Humidity | 20%~80%RH |
| Net Weight 46g | 46g |
Typical Application Industry
Ø Logistics Enterprises
Ø Car Rental Company
Ø Logistics Distribution
Ø Intelligent Transportation
Ø Safety Supervision
Alarm Type
Ø Vibration Alarm
Ø Collision / falling Alarm
Ø Speed Alarm
Ø Geo-fence Alarm
Installation
The TK319-H vehicle tracking device must be installed in a vehicle in such a way it has an unobstructed view of the sky during normal operation. If needed, use a double sided foam tape to secure the surface not facing the sky.
In addition to the above features, TK319-H comes with the provision to add a motion detector to the main board that can be used to wake the device from a very low power state.
){kind=link}