Alarm Type
Ø Vibration Alarm
Ø Collision Alarm
Ø Speed Alarm
Ø Geo-fence Alarm
Ø SOS Alarm
Ø Engine off Alarm(need relay)
Ø Power disconnected Alarm
Certifications:
PTCRB, GCF, FCC,IC, R&TTE
RCM, CCC, Giteki, Anatel, AT&T
Rogers (all planned)
Typical Application Industry
Ø Logistics Enterprises
Ø Car Rental Company
Ø Logistics Distribution
Ø Intelligent Transportation
Ø Safety Supervision
Installation
The TK116-3g vehicle tracking device must be installed in a vehicle in such a way it has an unobstructed view of the sky during normal operation. If needed, use a double sided foam tape to secure the surface not facing the sky.
In addition to the above features, TK116-3g comes with the provision to add a motion detector to the main board that can be used to wake the device from a very low power state.
Advanced Data Reporting Capabilities
The TK116-3g vehicle tracker consists of two piece of plastic enclosure which is waterproof IP65 for reliability, durability and low-cost assembly. The GPS patch and UMTS/HSPA antenna are placed internal to the device. The tracker itself can initiate data reporting through UMTS/HSPA's SMS, TCP/IP or UDP pathways or over a physical UART connection. Network provisioning is done using SIM technology for reliability and cost saving. The TK116-3g can be provisioned for TCP/IP, UDP and SMS data services for application command and data transactions within the 850, 900, 1800 and 1900 MHz GSM bands and 800,850,900,1900 and 2100MHz UMTS/HSPA bands.
A hardware TK116-3g endpoint reset and reboot is initiated for added safeguard against network connection loss. This can be done by simply calling the provisioned phone number and allowing it to ring three times.
Over The Air (OTA) application firmware updates are supported through at TFTP connection to a server. The high-level application image can be updated by using one specialized SMS or UART command.
Audited Supplier 
){kind=link}
){kind=link}